QuinLED-Dig-Uno Soldering guide This guide is for boards v2r5 and lower. Please see revision history for differences and/or newer versions QuinLED-Dig-Uno v2r6 guide is here To solder the QuinLED-Dig-Uno together I’ve made a video which takes you through all the steps involved. I think anyone should be able to follow along and basically replicate what […]

QuinLED-Dig-Uno Pinout Guide QuinLED-Dig-Uno v2r5+ QuinLED-Dig-Uno board v3 has been released, please go here There is also an updated wiring guide here! L1_D and L1_C are only usable as outputs since the Level Shifter is unidirectional. The Dedicated GPIO’s are usable as inputs or outputs. –Update 2019-09-18 + 2020-09-06 Two issues have come to light […]

QuinLED-Dig-Uno Hardware guide This hardware guide is for board revision v2r5, current version is higher, please see the revision page for updates. Please see Dig-Uno Index for newest articles   To build the QuinLED-Dig-Uno you are going to need several components which are listed below. As a little disclaimer, please take a look at this article […]

QuinLED-Dig-Uno Back to index page v3 pre-assembled and DIY have been released, please see the board index page for current articles! QuinLED-Dig-Uno is part of the digital LED controller family and is an ESP8266/ESP32 powered WiFi connected addressable LED (strip) controller. QuinLED-Dig-Uno is suited for Clocked (Data and Clock pin) and Clockless 5v or 12v […]