QuinLED-ESP32-AE+ Pinout Guide
The QuinLED ESP32-AE+ was discontinued with the introduction of the QuinLED ESP32 v4. This information remains available for existing users.
A list of GPIO pins used by all components of the QuinLED-ESP32-AE+ add-on board.
Please install the correct build from https://install.quinled.info and it will all be included and pre-configured!
Currently WLED cannot use the Micro-SDcard slot but ESPixelstick v4 has been tested with it and it’s working well in the current Beta’s!
| GPIO_ESP32 | Board | Use |
|---|---|---|
| GPIO33 | Touch | Touch button |
| GPIO26 | IR | Infra-Red Receiver |
| GPIO21 | LED6 | LED output 6 |
| GPIO17 | LED7 | LED output 7 |
| GPIO22 | LED8 | LED output 8 |
| GPIO27 | Mic-WS | Microphone WS |
| GPIO25 | Mic-SD | Microphone SD |
| GPIO32 | Mic-SCK | Microphone SCK |
| GPIO18 | SD-CLK | SDcard CLK |
| GPIO23 | SD-DI | SDcard DI / MOSI |
| GPIO_5 | SD-CS | SDcard CS |
| GPIO19 | SD-DO | SDcard DO / MISO |
