QuinLED An-Penta-Plus Capabilities

Back to QuinLED An-Penta-Plus Index

The QuinLED An-Penta-Plus was designed to be a step up vs the An-Penta-Mini in regards to capabilities enhancing the total board power to from 10A to 30A and the per channel limit from 5A to 10A per channel. The QuinLED An-Penta-Plus further also features special power injection terminals for 2 of it’s channels for really power hungry or long strips.

Capabilities

PWM and bit depth resolution

For the An-Penta-Plus the PWM bit depth available is listed below:

• 80Mhz
  • 1Hz-1.223Hz with 16-Bit resolution (65536 steps)
  • 1Hz-2.446Hz with 15-Bit resolution (32768 steps)
  • 1Hz-4.892Hz with 14-Bit resolution (16384 steps)
  • 1Hz-9.784Hz with 13-Bit resolution (8192 steps)
  • 1Hz-19.569Hz with 12-Bit resolution (4096 steps)
  • 1Hz-39.138Hz with 11-Bit resolution (2048 steps)
  • 1Hz-78.266Hz with 10-Bit resolution (1024 steps)
  • 2Hz-156.555kHz with 9-Bit resolution (512 steps)
    • Higher PWM frequencies are possible with lowered bit depth (and potentially lower max power handling, please see power handling article for details)

Voltage capabilities

• 12v-48v Compatible with 30A max total current handling
  • Internally fused at 4x 8Amp + 1x 5Amp per positive channel with swappable fuses
    • Please see dedicated Power Handling article for exact details!

Flexibility and Current capabilities

• 5x analog PWM output channels
  • 5x “high-power” channels up 10A
    • 2x channels have extra power injection terminals available  (generally for white LED strips)
  • Because of programmability of the controller these can be used “as seen fit” such as:
    • 5x white individually controllable
    • 1x RGB + 2x white individually controllable
    • 1x RGB+CCT (so a strip with Red, Green, Blue, Warm White and Cold White LEDs)

[photo]