QuinLED-dig2analog+ Board Dimensions
The dig2analog+ is a fairly compact board so it can be integrated in spots where you might need it! There is a 3D printable enclosure available but if you’d like to design your own. You can download a STEP file (99% accurate 3D models) over here.
The large capacitor is the highest points on the board and that measures 16 to 17mm high from board to top. But make sure to take into account the 1.6mm thickness of the board and also that it’ll have pins sticking out on the bottom, this adds about 5mm below the board. So the total package is about 20mm to 22mm in total height considering the bottom pins, the board and everything.
*Please make sure that if you are mounting the boards these are lifted above the mounting surface, all pins on the bottom are conductive!
