The dig2go is available as complete unit inside of a custom plastic housing or, upon request, as the bare populated PCB to integrate into your own product. Below are dimensions to help you figure out if it’s going to work for your application!
The case is 41mm wide, 57mm high and 17mm tall. For the button location please see dimensions on the PCB board below it’s the 16,7000mm location.
PCB board dimensions
The PCB is a 4 layer PCB of 1.6mm thick. The height of the PCB and components is about the same as the case height so 17mm. The board has components on both sides so can’t be mounted flat without spacers on either side.