QuinLED Diff-Adv Receiver-Midpoint-2 Specifications
Back to QuinLED-Diff-Adv main page
The QuinLED Diff-Adv System consists of multiple boards, this article is specifically about the QuinLED Diff-Adv Receiver-Midpoint-2. The function of this board is to take in the differential output of the QuinLED Diff-Adv Sender-4, select one or two of the signals to transform it back to normal LED data signals and output this to some LEDs while having the rest of the signals continue on to the next board in the chain using the second RJ45 output port.
The output LED signals are fully level-shifted with a 33R resistor and the board features built-in power distribution and fusing! Ideal if you are using 5v or 12v LEDs and need multiple power outputs to do power injection.
You only need a power supply of the same voltage as your LEDs and the receiver board and you are done at that location!
If no other boards are linked in the chain anymore, please make sure to insert the terminator plug into the output terminal.
QuinLED Diff-Adv Receiver-Midpoint-1
- Color: Blue
- Power Input Screw terminals
- 2p 9.5mm “barrier style”
-
- Supports up to 10AWG with fork crimps
- VCC
- GND
-
- 2p 9.5mm “barrier style”
- Differential input/output
- 2x RJ45 socket with lip on top side
- 1x Input
- 1x Output
- Pinout for the RS-485 communication lines can be found here
- 2x RJ45 socket with lip on top side
- Output Screw Terminals
- 2x 4p 6.35mm “rising clamp”
-
- Supports up to 12AWG with wire ferrule
- VCC (same voltage as input!)
- GND
-
- 1x 2p 5.08mm “rising clamp”
- LED Data 1
- LED Data 2
- 2x 4p 6.35mm “rising clamp”
- 4x Switch for selecting LED output channel
- Supports up to 2x switch being turned on
- Divided in groups
- Switch 1&3 are linked to LED Data 1
- Switch 2&4 are linked to LED Data 2
- Divided in groups
- Supports up to 2x switch being turned on
- Supported board input & output voltage through screw terminals
- 5v-48v (auto input)
- Board Power usage
- ~30mA at 5v
- ~16mA at 12v
- ~10mA at 24v
- ~6mA at 48v
- Power handling
- The board comes delivered with
- 2x 10A fuse
- Ideal for “middle” injections
- 2x 5A fuse
- Ideal for “edge” injections
- 2x 10A fuse
- Broken fuse indicator built-in per channel
- The board comes delivered with
- LED Data output levels
- Level-Shifted 5v with 33R resistor
- Termination resistor
- Pluggable, included with Sender-4!
- Please insert Terminator into output port if last board in daisy chain
- Pluggable, included with Sender-4!
- Mounting holes
- 4x M3