Menu

QuinLED Diff-Adv Receiver-Midpoint-1 Specifications

Back to QuinLED-Diff-Adv main page

The QuinLED Diff-Adv System consists of multiple boards, this article is specifically about the QuinLED Diff-Adv Receiver-Midpoint-1. The function of this board is to take in the differential output of the QuinLED Diff-Adv Sender-4, select one of the signals to transform it back to normal LED data signal and output this to some LEDs while having the rest of the signals continue on to the next board in the chain using the second RJ45 output port.

The output LED signal is fully level-shifted with a 33R resistor and the power is fused on the board!

You only need a power supply of the same voltage as your LEDs and the receiver board and you are done at that location!

If no other boards are linked in the chain anymore, please make sure to insert the terminator plug into the output terminal.

QuinLED Diff-Adv Receiver-Midpoint-1

  • Color: Blue
  • Power Input Screw terminals
    • 2p 5.08mm “rising clamp”
        • Supports up to 14AWG with wire ferrule
      • VCC
      • GND
  • Differential input/output
  • Output Screw Terminals
    • 3p 5.08mm “rising clamp”
        • Supports up to 14AWG with wire ferrule
      • VCC (same voltage as input!)
      • LED Data
      • GND
  • 4x Switcher for selecting LED output channel
    • Max 1 switch can be turned to On
  • Supported board input & output voltage through screw terminals
    • 5v-48v (auto input)
  • Board Power usage
    • ~20mA at 5v
    • ~12mA at 12v
    • ~6mA at 24v
    • ~3mA at 48v
  • Power handling
    • The board comes delivered with a 5A fuse standard
      • Supports up to a 10A fuse
    • Broken fuse indicator built-in!
  • LED Data output levels
    • Level-Shifted 5v with 33R resistor
  • Termination resistor
    • Pluggable, included with Sender-4!
      • Please insert Terminator into output port if last board in daisy chain
  • Mounting holes
    • 4x M3