QuinLED-Hybrid-Hexa Specifications Back to QuinLED-Hybrid-Hexa Index NOT FINISHED The QuinLED-Hybrid-Hexa was designed with the goal of being able to control lots of LED strips from a single controller! Please see a list of it’s hardware features and capabilities below: Features Based on the Espressif ESP32 Micro-controller chip 2.4Ghz WiFi connection with External Antenna USB-C plug with programming capability […]
QuinLED-Hybrid-Hexa Back to Analog sample page The QuinLED-Hybrid-Hexa is part of the 2023 QuinLED Analog “PWM Dimmer” pre-assembled board line-up. It’s been designed with the goal of having a few very high power channels combined with a single Digital LED channel and Ethernet. Primarily designed towards Home Automation usage for controlling “Analog”/Dumb LED strips it’s […]
dig2go revision history Back to dig2go index 2022-11 (v1r1) Initial release of the dig2go 2022-12 (v1r2) No functionality change! Changed a ceramic capacitor to electrolytic capacitor preventing from “PWM noise” that could be heard on v1r1 with certain combinations of LED strip and USB power supplies. 2023-02 Removed pull-high resistors on pin headers to enable […]
Available dig2go bundles Back to dig2go index To make getting started with digitally addressable LEDs even easier the dig2go is available in various bundles. This will give you everything you need/want to immediately get started with lighting up your room and showing cool animations! All dig2go’s come pre-flashed with WLED and pre-configured out of the […]
Using a USB powerbank for addressable LEDs In this article we’ll explore the usage of USB-(A or C) powerbanks to run addressable LEDs such as ws2812b or sk6812 LED strips or ws2811 based pixels. Since this is for USB powerbanks we’ll be mainly focusing on 5v and the dig2go controller. 5v is most efficient Partly […]