dig2go revision history Back to dig2go index 2022-11 (v1r1) Initial release of the dig2go 2022-12 (v1r2) No functionality change! Changed a ceramic capacitor to electrolytic capacitor preventing from “PWM noise” that could be heard on v1r1 with certain combinations of LED strip and USB power supplies. 2023-02 Removed pull-high resistors on pin headers to enable […]
Available dig2go bundles Back to dig2go index To make getting started with digitally addressable LEDs even easier the dig2go is available in various bundles. This will give you everything you need/want to immediately get started with lighting up your room and showing cool animations! All dig2go’s come pre-flashed with WLED and pre-configured out of the […]
dig2go dimensions The dig2go is available as complete unit inside of a custom plastic housing or, upon request, as the bare populated PCB to integrate into your own product. Below are dimensions to help you figure out if it’s going to work for your application! Case dimensions The case is 41mm wide, 57mm high and […]
QuinLED-dig2go Back to Addressable LEDs section Available now! Below are the technical pages for the dig2go, please also visit https://dig2go.info and the getting started guide there! The QuinLED-dig2go is an easy to use small form factor addressable LED controller. It’s an easy entry point to digitally controllable LEDs or great and a quick go-to controller […]
QuinLED-Dig2GO Full Specifications Back to dig2go index Although the dig2go is a very small controller it does pack a lot of advanced hardware making it best in class to drive addressable LEDs from such a small form factor! Very small form factor in fully custom plastic molded case Not a re-used generic part, fully custom […]