What QuinLED Controller to get? Back to Addressable LEDs section Over the years the boards I offer have grown quite a lot, so what board should you get for your project? That’s a more difficult question then you’d imagine! I have a great video about selecting a digital controller but this article will include analog […]
QuinLED Resistor Switcher Back to Addressable LEDs section During the 2022 revision updates of the QuinLED Dig-Uno, Dig-Quad and on the initial version of the Dig-Octa and Data-Booster a resistor switcher functionality was added to the boards. These resistor-switchers allow you to switch between a 249R and 33R output resistor, this helps adapt the data […]
WLED crashes and reboots every xx minutes (mDNS) Back to article index Over the past year we’ve been getting various reports of people having issues with their WLED controller (QuinLED or other) rebooting unexpectedly. This can of course have various causes but in this specific case it’s a reboot every 5 minutes or every hour […]
Tags:
QuinLED Diff-Adv Adding a relay to the mix Idle power draw, 2 problems Idle LED ICs Digital LEDs still use power even when not displaying anything, this is because each LED or group of LEDs has a little tiny IC connected to it and even if there is no light output, this tiny little IC […]
QuinLED Diff-Adv Buying Page Back to QuinLED Diff-Adv main page If you’d like to pick up a Sender-4, Receiver-Midpoint-1 or Receiver-Midpoint-2 please follow the link below. To make a complete system you need at least one Sender-4 combined with one of the Receiver boards, after that you can mix and match expand as needed for […]