QuinLED-Hybrid-Hexa ESPhome Example configs WORK IN PROGRESS substitutions: esphome_name: preprod-anhybrid-1 esphome: name: ${esphome_name} esp32: board: mhetesp32devkit #framework: # type: esp-idf # version: latest ethernet: type: LAN8720 mdc_pin: GPIO23 mdio_pin: GPIO18 clk_mode: GPIO17_OUT phy_addr: 0 use_address: 10.10.128.101 #power_pin: GPIO5 #manual_ip: # Set this to the IP of the ESP #static_ip: 10.10.128.123 # Set this to the […]
QuinLED-Hybrid-Hexa Back to Analog sample page The QuinLED-Hybrid-Hexa is part of the 2023 QuinLED Analog “PWM Dimmer” pre-assembled board line-up. It’s been designed with the goal of having a few very high power channels combined with a single Digital LED channel and Ethernet. Primarily designed towards Home Automation usage for controlling “Analog”/Dumb LED strips it’s […]
dig2go revision history Back to dig2go index 2022-11 (v1r1) Initial release of the dig2go 2022-12 (v1r2) No functionality change! Changed a ceramic capacitor to electrolytic capacitor preventing from “PWM noise” that could be heard on v1r1 with certain combinations of LED strip and USB power supplies. 2023-02 Removed pull-high resistors on pin headers to enable […]
Available dig2go bundles Back to dig2go index To make getting started with digitally addressable LEDs even easier the dig2go is available in various bundles. This will give you everything you need/want to immediately get started with lighting up your room and showing cool animations! All dig2go’s come pre-flashed with WLED and pre-configured out of the […]
dig2go dimensions The dig2go is available as complete unit inside of a custom plastic housing or, upon request, as the bare populated PCB to integrate into your own product. Below are dimensions to help you figure out if it’s going to work for your application! Case dimensions The case is 41mm wide, 57mm high and […]