QuinLED-Deca Hardware guide To build the QuinLED-Deca you are going to need several components which are listed below. As a little disclaimer, please take a look at this article about my shopping links. After reading that, make sure to also take a look at the additional hardware and tools you might need to be able […]
RGB (Red Green Blue) strips RGB strips come in lots of different shapes and sizes. Most strips use a 5050 LED package (5mmx5mm) with 3 colors inside of them. This means that each little LED module has a tiny LED in it for each color. Since what you are trying to light is always “far […]
QuinLED-An-Deca Specifications Back to Index Page Features MH-ET-Live ESP32 development board Dual-Core CPU with plenty of memory and hardware timers for PWM generation WiFi 2.4Ghz 802.11 N connectivity Wide software compatibility through Arduino IDE, Micropython or other distributions Onboard Micro-USB port and Reboot/EN switches 10 channels with TO-220 MOSFET for PWM dimming Tested 300.000Hz PWM […]
QuinLED-An-Quad Back to Index Page Features MH-ET-Live ESP32 development board Dual-Core CPU with plenty of memory and hardware timers for PWM generation WiFi 2.4Ghz 802.11N connectivity Wide software compatibility through Arduino IDE, Micropython or other distributions Onboard Micro-USB port and Reboot/EN switches 4 channels for PWM LED dimming Up to 300.000Hz (tested) PWM dimming […]
QuinLED-Quad Hardware guide If you are looking for information about the board and it’s capabilities, please take a look over here first. To build the QuinLED-Quad you are going to need several components which are listed below. As a little disclaimer, please take a look at this article about my shopping links. After reading that, […]