Dig-Next-2 Relay port Back to Dig-Next-2 Index The Dig-Next-2 includes a dedicated relay port. The port is a JST PH type but the cable you need for it is included with your controller: Relay Cable (3pin PH to wire) Red = (always) 5V Black = GND Yellow = (always) 5V trigger This allows you to […]
Dig-Next-2 Internal / External Relay(s) Back to Dig-Next-2 Index Single 16A AC relay connected to the Dig-Next-2 using the included pigtail The QuinLED Dig-Next-2 has 2 features built in to try and save as much energy as possible. Because digitally addressable LEDs have an internal IC they are basically never off and always consume a […]
QuinLED-Dig-Octa Relay output & Standby power Back to Dig-Octa main Some of the QuinLED-Dig-Octa brainboards might have a relay feature. This feature allows you to connect a simple relay board to this connection to allow turning on and off the main LED power supply connected to a powerboard for instance. List of current boards with […]
QuinLED-Dig boards and using a relay and the vEXT function Back to article index Addressable LEDs use power even while off (not displaying light). To combat this idle power usage you can use a relay to cut off the power from the LEDs. This can be done on the DC side but large current make […]