QuinLED-Dig-Uno Hardware guide This hardware guide is for board revision v2r5, current version is higher, please see the revision page for updates. Please see Dig-Uno Index for newest articles To build the QuinLED-Dig-Uno you are going to need several components which are listed below. As a little disclaimer, please take a look at this article […]
Power Supply Considerations If you want your LEDs to light up, you’re going to need a power supply! These come in lots of shapes and sizes and you need to figure out what you are going to need for your project. Although overkill (in wattage/amperage) mostly isn’t a problem, an power supply that has been […]
Tools and Equipment Next to the components needed for the boards themselves you are also going to need some tools and equipment to solder and hook-up the board. Below will be a convenient list with the tools and equipment I can recommend! It will also feature some additional items like screws, wires or anything else […]
Tags:
LED modules per meter Back to article index When buying LED strip there are several parameters you should be looking at. One of those is how many LED modules have been placed per meter of strip. Price is very often directly tied to this parameter because the higher the density of LED modules on a […]
RGB (Red Green Blue) strips RGB strips come in lots of different shapes and sizes. Most strips use a 5050 LED package (5mmx5mm) with 3 colors inside of them. This means that each little LED module has a tiny LED in it for each color. Since what you are trying to light is always “far […]