QuinLED-An-Penta DIY Revision History Back to QuinLED-An-Penta-DIY index page To try and keep track of past revisions and the major changes between the versions here is a list of past releases and some of the things that have changed QuinLED-An-Penta DIY Version 1 Revision 1 2021-12 Initial beta release version Revision 2 2022-03-31 Full release […]
QuinLED-An-Quad Back to Analog LEDs section Recently renamed from QuinLED-Quad to QuinLED-An-Quad! QuinLED-An-Quad is a ESP32 powered 4 channel WiFi PWM dimmer for 12v and 24v LED strips. It’s design goal was keeping the footprint/size as small as possible while still enabling 4 high-power channels so you can run 4 independent LED strips or use […]
Tags:
QuinLED-An-Penta DIY WLED and Usermod Back to QuinLED-An-Penta-DIY index page Generic configuration Basic configuration data For a generic configuration in WLED please see the pinout guide which pins to use! Here you can find everything from the GPIOs used for the LED channels, buttons, etc. Special usermod! ezcGman | Andy has worked hard creating a […]
QuinLED-An-Penta DIY Pinout Guide Back to QuinLED-An-Penta-DIY index page QuinLED-An-Penta v1r2 – Power Terminals A description of the power terminals available on the board. Please make sure power supply and input voltage match voltage LEDs need! QuinLED-An-Penta v1r2 – Logical pinout A description of all available logical port and terminals on the board. The GPIO_ESP32 […]
QuinLED-An-Penta DIY ESPhome Example configuration Back to QuinLED-An-Penta-DIY index page The QuinLED-An-Penta board is fully compatible with ESPhome. With the 5 channels available, SPI OLED header, 3 switch inputs, I2C temperature sensor and screw terminals there is a lot going on and that can be configured. Below will be some example configurations of how I […]