QuinLED-An-Quad Back to Analog LEDs section Recently renamed from QuinLED-Quad to QuinLED-An-Quad! QuinLED-An-Quad is a ESP32 powered 4 channel WiFi PWM dimmer for 12v and 24v LED strips. It’s design goal was keeping the footprint/size as small as possible while still enabling 4 high-power channels so you can run 4 independent LED strips or use […]
QuinLED-Data-Booster Back to Addressable LEDs section Since v3.1 of the pre-assembled Dig-Uno and Dig-Quad they have a selectable resistor switcher circuit built-in (33R and 249R) so a data-booster right behind the Dig board is not needed anymore. The QuinLED-Data-Booster is a little board to solve some common problems around building up a addressable LED setup, […]
QuinLED-ESP32 Back to Addressable LEDs section Because I was unsatisfied with the quality of the generic ESP32 boards that come in the D1 Mini32 form factor at some after starting to offer pre-assembled QuinLED-Dig-Uno and QuinLED-Dig-Quad boards I decided to design my own and basically start producing it in house where I have full control […]
QuinLED-Dig-Quad Back to Addressable LEDs section The QuinLED-Dig-Quad is a Digital LED controller that builds upon the features of the smaller QuinLED-Dig-Uno and has specific features to do larger scale projects while staying compact and offering much of the same features. These features include using an ESP32, screw input and output terminals, high board power […]
QuinLED-An-Penta DIY WLED and Usermod Back to QuinLED-An-Penta-DIY index page Generic configuration Basic configuration data For a generic configuration in WLED please see the pinout guide which pins to use! Here you can find everything from the GPIOs used for the LED channels, buttons, etc. Special usermod! ezcGman | Andy has worked hard creating a […]