QuinLED-Dig-Uno Pre-Assembled v3.1 Specifications Back to index page Specifications for v3 of the board, see v2 specifications here QuinLED-Dig-Uno is part of the digital LED controller family and is an ESP8266/ESP32 powered WiFi connected addressable LED (strip) controller. It’s designed to be compact and an easy and especially safe way to run addressable LEDs. It’s […]
QuinLED-Dig-Uno DIY v3 Specifications Back to index page This is a DIY project, there is also a pre-assembled version for sale, please go back to the index! Specifications for v3 of the board, see v2 specifications here QuinLED-Dig-Uno is part of the digital LED controller family and is an ESP8266/ESP32 powered WiFi connected addressable LED […]
QuinLED-Dig-Uno Pre-Assembled boards available! Back to index page Current version v3.5r3 Don’t know what a QuinLED-Dig-Uno is? Click here for the introduction video! Are you looking to run the excellent WLED software but don’t want to cobble together an ESP8266 with some loose wires, do the soldering or maybe want a bit safer setup? The […]
QuinLED-Dig-Uno Wiring Guide Back to index page QuinLED-Dig-Uno board v3 has been released, please go here for pinout guide In this guide there might be references to L1_C and L1_D, these names where changed on v3 boards to LED1 and LED2 respectively. Wiring Guide Wiring LED strip seems simple but becomes more complex the longer […]
QuinLED-Dig-Uno Pinout Guide Back to index page QuinLED-Dig-Uno v3 / v3.1 If you are looking for the QuinLED-Dig-Uno v2 pinout guide, please go here The GPIO_ESP32 number is what you use in WLED! LED1 and LED2 are only usable as outputs since the Level Shifter is unidirectional. The Dedicated GPIO’s are usable as inputs or […]