Dig-Next-2 Pinout Guide Back to Dig-Next-2 Index Although you can install the pre-configured QuinLED WLED firmware, if you wish to use a different build or different software all together having the pinout will allow you to configure everything manually. The Dig-Next-2 uses a recent (2025) version of the ESP32 module and has some pins available […]
Dig-Next-2 Microphone Back to Dig-Next-2 Index The Dig-Next-2 has a built in I2S PDM microphone right on the board with a special microphone hole in the case to get the best sound reactivity. If you install a QuinLED compiled WLED version this is already pre-configured but if you wish to configure it yourself, please use […]
Dig-Next-2 Internal / External Relay(s) Back to Dig-Next-2 Index Single 16A AC relay connected to the Dig-Next-2 using the included pigtail The QuinLED Dig-Next-2 has 2 features built in to try and save as much energy as possible. Because digitally addressable LEDs have an internal IC they are basically never off and always consume a […]
Dig-Next-2 Power Handling Back to Dig-Next-2 Index Dig-Next-2 with 3x 14AWG with wire ferrules and separate 2-wire data+GND 20AWG cables The Dig-Next-2 is designed from the ground up to to handle the currents involved with addressable LED setups, building upon years of QuinLED controller experience renewed and folded into the Dig-Next-2. I believe it’s unique […]
Dig-Next-2 Specifications Back to Dig-Next-2 Index As the initial overview pay already mentioned the Dig-Next-2 is geared towards entry level to medium size LED setups. Depending on voltage this ranges from a few meters up to 30m! The specifications are carefully selected with the combined experience of thousands of LED installs over the years, adapting […]