QuinLED dig2analog specifications Back to index page The dig2analog is based on the WorldSemi WS2814F chip. This chip is used to “extract” the data for a single LED/Pixel and the board converts it to a PWM output able to drive 12v or 24v LED strips up to RGBW. The onboard circuitry has been carefully tuned […]
QuinLED dig2analog Back to Addressable LEDs section 2023-11-21 Boards are available for purchase! The dig2analog is based on the WorldSemi WS2814F chip. This chip is used to “extract” the data for a single digital LED/Pixel and the board converts it to a PWM output able to drive Dumb/Analog 12v or 24v LED strips with PWM […]
QuinLED-Hybrid-Hexa ESPhome Example configs WORK IN PROGRESS substitutions: esphome_name: preprod-anhybrid-1 esphome: name: ${esphome_name} esp32: board: mhetesp32devkit #framework: # type: esp-idf # version: latest ethernet: type: LAN8720 mdc_pin: GPIO23 mdio_pin: GPIO18 clk_mode: GPIO17_OUT phy_addr: 0 use_address: 10.10.128.101 #power_pin: GPIO5 #manual_ip: # Set this to the IP of the ESP #static_ip: 10.10.128.123 # Set this to the […]
QuinLED-Hybrid-Hexa Back to Analog sample page The QuinLED-Hybrid-Hexa is part of the 2023 QuinLED Analog “PWM Dimmer” pre-assembled board line-up. It’s been designed with the goal of having a few very high power channels combined with a single Digital LED channel and Ethernet. Primarily designed towards Home Automation usage for controlling “Analog”/Dumb LED strips it’s […]
dig2go revision history Back to dig2go index 2022-11 (v1r1) Initial release of the dig2go 2022-12 (v1r2) No functionality change! Changed a ceramic capacitor to electrolytic capacitor preventing from “PWM noise” that could be heard on v1r1 with certain combinations of LED strip and USB power supplies. 2023-02 Removed pull-high resistors on pin headers to enable […]