QuinLED dig2analog+ Wiring Guide This guide is an (slightly updated) copy from the dig2analog (non-plus) article and images have not been changed! Wiring between dig2analog and dig2analog+ is 100% identical Back to index page Hooking up the dig2analog+ is fairly simple since the board basically behaves like a single addressable LED or pixel thus you […]
QuinLED dig2analog+ specifications Back to index page The dig2analog+ is based on the WorldSemi WS2805 chip. This chip is used to “extract” the data for a single LED/Pixel and the board converts it to a PWM output able to drive 12v – 48v LED strips up to RGBCCT (RGB + Dual White). The onboard circuitry […]
QuinLED dig2analog+ Back to Addressable LEDs section 2026-01 Available from Worldwide right now! The dig2analog+ is based on the WorldSemi WS2805 chip and is an upgrade to the dig2analog (non-plus) in various ways. The function of the board is still the same, the ws2805 is used to “extract” data from a digital LED data signal, […]
The Dig-Next Series of LED controllers Back to Addressable LEDs section Also visit the new dedicated website: https://dig-next.info ! The Dig-Next series of LED controllers from QuinLED builds upon the well received dig2go, Dig-Uno, Dig-Quad and Dig-Octa series of addressable LED controllers re-envisioned for the Next Generation of Addressable LED controllers! The idea is to […]
QuinLED An-Penta-Deca ESPhome configuration example Back to QuinLED An-Penta-Deca Index To help out building your own configuration for the QuinLED An-Penta-Deca below is a basic ESPhome configuration as I generally use with the board. This can of course be fully adjusted to whatever your own needs are so treat it as a starting template. The […]