QuinLED-Dig-Hexa has not been released yet! Will come somewhere in the future!

QuinLED-Dig-Hexa is part of the digital LED controller family and is an ESP32 powered WiFi connected addressable LED (strip) controller.

QuinLED-Dig-Hexa is suited for 5v LED strips with various chips such as the WS2812b (Neopixel), APA102/SK9822 (Dotstar) or SK6822 LED chips.

previous arrowprevious arrow
next arrownext arrow


  • MH-ET-Live ESP32 development board
    • Dual-Core CPU with plenty of memory and hardware timers for PWM generation
    • WiFi 2.4Ghz 802.11 N connectivity
    • Wide software compatibility through Arduino IDE, Micropython or other distributions
    • Onboard Micro-USB port and Reboot/EN switches
  • 2x Onboard SN74HCT245 DIP-20 3.3v –> 5v level shifter for driving maximum length strips
  • Triple power input terminals (3x +, 3x -) for getting maximum input power through the board
    • Input voltage should always be a stable 5v!
  • Space for 2 onboard capacitor to smooth out current delivery
  • Onboard DS12B20 temperature sensor
  • 3 GPIO in/outputs available through pin headers
    • 2x 5v + 1x 3.3v
    • 3x GND pins
  • 3x Mounting holes
    • 2x M3, 1x M3
  • Medium size
    • Fully assembled the size is about 10cm by 5cm with a height of 2,5cm

Power handling

Power handling depends on the amount of copper that is applied to the PCB. Generally these values are 1OZ by default or 2OZ if you pay extra. Depending on your needs you need to select the right amount of copper you need in your boards.

This board has a triple set of input terminals to provide maximum input power. For output power there are terminals per channel, including positive 5v and GND.

Addressable LED strip often comes with seperate barrel plugs or cables to feed in more power into the strip directly and/or on both sides. I’ve designed the QuinLED-Dig series to handle as much amperage as possible but there are limits. If more power is needed, please make sure to feed the strip directly from the same power supply!

Compared to the QuinLED-Dig-Duo the QuinLED-Dig-Hexa can handle a lot more power flowing through the board, although output per port is still limited.

*Hooking up multiple power supplies is not recommend!

Maximum input/output voltage


Maximum total power input

1 OZ copper 2 OZ copper
45 Amps 75 Amps
5v 225w 375w


Max 1 port power output

1 OZ copper 2 OZ copper
15 Amps 20 Amps
5v 75w 100w